Chapter 2: Installation and First-Time Setup
System requirements, installing Scribis on Mac and Windows, the first-run setup wizard, downloading models, and turning on the permissions you need.
Chapter 2: Installation and First-Time Setup
2.1 Will it run on my computer?
| Item | Requirement |
|---|---|
| Mac | macOS 14 (Sonoma) or later. Apple silicon (M1, M2, M3, M4…) is fastest, but Intel Macs work too |
| Windows | Windows 10 or 11 (64-bit) |
| Memory | 8 GB minimum, 16 GB or more recommended |
| Disk space | Leave at least 10 GB free for the app plus one or two models |
| Graphics card | Not required. Windows PCs with an NVIDIA graphics card can turn on acceleration (see 2.5) |
💡 Not sure which kind of Mac you have? Click the Apple menu at the top left of the screen → About This Mac and look at the "Chip" line. If it starts with Apple M, you have Apple silicon; if it says Intel, you have an Intel Mac. Both work.
💡 What is a model, and why does it need disk space? A model is the AI that "listens and types." Once it's downloaded to your computer, it works offline. Small models are about 100 MB and large ones about 1–3 GB. You only need to download the ones you'll use.
2.2 Install Scribis
Mac
Choose either one:
- Mac App Store: open the App Store, search for "Scribis" and click Get. The App Store handles installing and updating for you, so this is the easiest option.
- Download from the website:
- Go to the Scribis website at www.scribis.app and download the Mac installer (the file name ends in .dmg).
- Double-click the downloaded file and drag the Scribis icon into your Applications folder.
- Open the Applications folder and double-click Scribis.
Windows
- Go to the Scribis website at www.scribis.app and download the Windows installer (the file name ends in .exe).
- Double-click it and click "Next" through the steps on screen.
- If a blue "Windows protected your PC" message appears: this is Windows' usual warning for newly downloaded files. Continue only if you downloaded the file from www.scribis.app. Then click More info, then Run anyway to continue installing.
2.3 First launch: the setup wizard
The first time you open Scribis, a Welcome to Scribis wizard appears. It only takes three steps:
- Language: the App Interface Language is the language of the text on screen (for example English). The Primary Transcription Language is the language most of your videos or recordings are in.
- Recommended Models: Scribis suggests a model based on your language. Click Download.
- You're all set!: click Start Transcribing and you're ready to go.
To check the status later, go to Settings › Overview. A green check mark and "Core Engine: Operational" mean everything is ready.

2.4 Download or change models
- Click Settings in the left menu (the gear icon).
- In the settings menu, click Models › Transcription.
- Category tabs run across the top, for example Recommended, Traditional Chinese and English + European (CPU Fast). Click the one you need.
- Click Download on the model card you want. When it's finished, it shows a green Downloaded label.

To free up disk space, click Remove on models you don't use. Not sure which one to choose? See the model recommendations in Chapter 3.
2.5 Make transcription faster: hardware acceleration (optional)
You can skip this section. Scribis works fine without it.
- Mac: Scribis automatically uses Apple silicon acceleration. There's nothing to set up. The Settings › Hardware page only shows the status.
- Computers without a dedicated graphics card: just use Scribis as it is. Choose models marked "CPU Fast" (fast even without a graphics card), such as SenseVoice or Parakeet.
- Windows with an NVIDIA graphics card (advanced): turning this on makes transcription much faster.
- Update your graphics card's driver (the software that makes the card work) from the NVIDIA website.
- Back in Scribis, open Settings › Hardware, click Check CUDA, then turn on Enable CUDA (CUDA is NVIDIA's acceleration technology).
- Scribis may ask to download a helper file that lets it use your NVIDIA graphics card. Click to download it and wait until it finishes. If you run into trouble, scroll further down that same Hardware page in Scribis for more detailed setup instructions.

2.6 Turn on permissions (Mac)
Some features need you to click "Allow" once on your Mac:
| Permission | When it's needed | Where to turn it on |
|---|---|---|
| Microphone | Recording and live dictation | System Settings › Privacy & Security › Microphone |
| Accessibility | Letting the AI Assistant paste text into other apps | System Settings › Privacy & Security › Accessibility |
| Screen & System Audio Recording | Recording sound your computer plays (for example an online meeting) | System Settings › Privacy & Security › Screen & System Audio Recording |
(System Settings calls it "Accessibility," and Scribis's notice says "Accessibility Permission." They're the same switch.)
How to turn one on: click the Apple menu at the top left of the screen → System Settings → Privacy & Security → click the item from the table (for example Accessibility), then turn on the switch next to Scribis. Your Mac may ask for your computer password.
Scribis also reminds you when it needs a permission. For example, Settings › Assistant shows a yellow Accessibility Permission Required on macOS notice. Click Open System Settings to jump straight to the right place, turn on the switch, then come back and click Check Again.

On Windows, click "Allow" when asked the first time Scribis uses your microphone. If you clicked "Don't allow" by mistake, go to Windows Settings › Privacy & security › Microphone and turn it back on.